AMC Bicycle Manuel d'utilisateur télécharger pdf (Page 4)

4 5

FOLDING YOUR BIKE

Step 1

Unpacking your bike. Carefully remove all protective

wrapping and discard. Set the Seat Assembly aside for

a moment. Standing on the bike chain side of the bike,

swing the front and rear halves of the bike apart.

Step 2

Secure the quick connect Frame Lock. Be sure that

the spring loaded bolt is tight and the fold down lever

rests ﬂush against the surface. Fold down the quick

connect lever. It should lock ﬁrmly in place.

Step 3

Secure the Handle Bar Lock. Swing the handle bar up into position.

Align the wedge shaped block into position and tighten down the

locking handle by turning it clockwise, until secure.

Step 4

Install the Seat Assembly. Install the Seat Assembly post into position

to your desired height. Tighten the Quick Release Seat Lever by

pushing forward until ﬁrm. Caution: If the Seat Assembly can still turn

from side to side, or slide up and down, you will need to tighten the

adjusting nut on the other side of the Quick Release Seat Lever before

securing. Note: 15 lb maximum weight for the Luggage Rack.

1 2 3 4

Pas de commentaire

AMC Bicycle Manuel d'utilisateur Page 4